Environmental Engineering
M. Mambwe; K.K. Kalebaila; T. Johnson
Abstract
BACKGROUND AND OBJECTIVES: With technological advances, mining industries use more crude oil and its products. Finding fast, effective, and eco-friendly repair techniques for oil-contaminated soil is crucial. Clay–titanium dioxide/manganese was used to investigate how oil breaks down in soil under ...
Read More
BACKGROUND AND OBJECTIVES: With technological advances, mining industries use more crude oil and its products. Finding fast, effective, and eco-friendly repair techniques for oil-contaminated soil is crucial. Clay–titanium dioxide/manganese was used to investigate how oil breaks down in soil under sunlight. Various soil remediation techniques have been used to discard oil pollutants in soil. A polluted site must be cleaned effectively with a suitable method. Natural attenuation takes too long to produce positive results, whereas landfarming can produce toxic intermediates due to the organisms’ inability to degrade other oil components. Photochemical oxidation is a promising eco-friendly technique that can be employed as an alternative remediation method. The speed at which natural attenuation, photochemical oxidation, and landfarming could remove oil from contaminated soils was examined. Photochemical oxidation’s superiority as a remediation technique over landfarming is hypothesized.METHODS: Using clay modified with titanium dioxide and manganese, the effectiveness of landfarming and photochemical oxidation on oil-contaminated soil was investigated, together with the processes’ kinetics. To establish the processes’ effectiveness and kinetics, the oil residue was calculated at 7-day intervals for 35 days.FINDINGS: Initial oil concentration was 56.6 milligrams per kilogram, and degradation rates ranged from 23.91-80.47 percent. Highest oil reduction was 10.86 milligrams per kilogram. Combined remediation (biocarb and grafted clays) produced high degradation rate constants, k (0.046-0.049/day) and low degradation half-lives, t½ (15.2, 17.4 days). Photochemical oxidation rate constants ranged from 0.015-0.03984/day and half-lives ranged from 17.395-44.971 days, whereas landfarming had a rate constant of 0.008 and half-life of 83.094. Natural attenuation had the lowest k (0.007) and longest half-life (t½) of 94.8 days. Significant differences in means were observed among treatments (control, biocarb, and bicarb + grafted clays) at p ≤ 0.05, suggesting that treatment caused oil decrease in microcosms for biocarb + grafted clays. Grafted clays plus biocarb show potential for combined remediation of oil-contaminated soil.CONCLUSION: One primary indicator used to assess treatments’ efficacy is oil reduction, calculated using difference in oil content in soil before and after remediation. This shows that oil can be quickly removed from oil-contaminated soil by using biocarb + grafted South Luangwa with 80 percent oil reduction. Results suggest that photochemical oxidation may be used to effectively degrade oil and shorten remediation time. Photochemical oxidation is environmentally friendly and degrades oil faster than landfarming. Zambia’s Mopani Copper Mines can consider adopting photochemical oxidation as a remediation technique in treating oil-contaminated soil.
Environmental Engineering
M. Mambwe; K. K. Kalebaila; T. Johnson
Abstract
Crude oil continues to impact many nations as it is among the major sources of fuel. Its role in making life in modern societies comfortable cannot be overemphasized as it is readily available and easy to use. Contamination resulting from its use in industries such as mining, transportation and ...
Read More
Crude oil continues to impact many nations as it is among the major sources of fuel. Its role in making life in modern societies comfortable cannot be overemphasized as it is readily available and easy to use. Contamination resulting from its use in industries such as mining, transportation and petroleum especially soil contamination cannot be overlooked. Soil pollution resulting from oil contamination can be seen as being among the twenty-first-century vulnerabilities because if not well taken care of the consequences can be devastating. Soil contamination is of interest in most societies because it affects both the environment and humans. This review highlights common sources of soil pollution and their effects, oil waste disposal methods, soil remediation techniques that are well established and those still in their infancy. Such techniques include bioremediation such as phytoremediation and landfarming, where percent removal of contaminated soils was reported from 68% to 89 % in 40 days to 1 year, respectively; physical methods such as excavation and incineration (75-86% removal); chemical methods such as oxidation (48 % by Fenton process); and photocatalysis (67% using titanium dioxide). The choice of remediation in mining, transportation and petroleum industries depends on the urgency and hazardous effects of the pollutant. In Zambia, Mopani Copper Mines uses landfarming as a means to mitigate large amounts of soil contaminated with oil wastes, but the process is slow. In the proposed research, photocatalysis coupled with adsorption of oil on clay will be used to assess the effectiveness of this emerging technology to quicken the degradation of oil in soils. Clay will be incorporated with metal ions and with hydrophobic groups to enhance light absorption and oil-clay interaction, respectively. Photochemical remediation techniques for remediation of soils polluted with oil have attracted considerable interest as the processes are reported to enhance the degradation of oils in soil compared to the biological and physical methods. The extent of photo-degradation of oil waste will be evaluated using the Soxhlet technique by determining the percent residual oil. The importance of remediating contaminated soil in any nation cannot be overemphasized as consequences of not remediating this precious resource might be devastating. Since economic development through industrialization will continue, there is need to constantly improve on methods of mitigating the impact of wastes on the environment, especially in developing countries, where engineering of cheap, nontoxic materials for soil remediation is paramount.